LTC1871 BOOST STEP UP MODULE 100W WITH DUAL DISPLAY VOLTMETER
Sepcifications
1, input voltage: 3 ~ 35V DC (Note: input voltage is less than 4V, onboard voltmeter failure)
2, the input current: 9A (max)
3, the output voltage: 3.5 ~ 35V DC (this plate is a step-up board, the output voltage is> = input voltage)
4, the output current: 6A (max)
5, the output power: 75W, (when the input voltage is greater than 20V output can reach 128W)
6, the conversion efficiency: 96.7% (maximum)
7, the output ripple: 24mV (TYP)
8 onboard voltage meter range: 4 ~ 40V, error + -0.1V
9, short-circuit protection: YES (limit current 14A). Tips: When access to high-power load, since the General Assembly just machines inrush current limiting is self-locking protection, it is recommended to boot, then access to the load.
10, input reverse polarity protection: None (if necessary, please enter the string into the high current diode).
11, length x width x height = 67 * 43 * 12MM (excluding pillars)