LTC1871 BOOST STEP UP MODULE 100W WITH DUAL DISPLAY VOLTMETER

Sepcifications

1, input voltage: 3 ~ 35V DC (Note: input voltage is less than 4V, onboard voltmeter failure)

2, the input current: 9A (max)

3, the output voltage: 3.5 ~ 35V DC (this plate is a step-up board, the output voltage is> = input voltage)

4, the output current: 6A (max)

5, the output power: 75W, (when the input voltage is greater than 20V output can reach 128W)

6, the conversion efficiency: 96.7% (maximum)

7, the output ripple: 24mV (TYP)

8 onboard voltage meter range: 4 ~ 40V, error + -0.1V

9, short-circuit protection: YES (limit current 14A). Tips: When access to high-power load, since the General Assembly just machines inrush current limiting is self-locking protection, it is recommended to boot, then access to the load.

10, input reverse polarity protection: None (if necessary, please enter the string into the high current diode).

11, length x width x height = 67 * 43 * 12MM (excluding pillars)